12 Safety Engineering jobs in Oman

Roles and Responsibilities

Key Competencies

• Knowledgeable in Process Safety and Equipment design.
• Should be able to read PFS/ PSFS /P&IDs
• Report Preparation for Safety Studies

Scope Of Responsibilities & Primary Duties

• DEM 1 / DEM 2 Identification & compliance report
• HSE philosophy
• HAZID, DR & HAZOP workshop
• HAZID, Design review and HAZOP close out
• Hazardous area classification schedule and layout
• Fire protection design basis
• SCE identification and Performance standards
• VCA & HFE workshop Closeout
• Fire , gas , dispersion and Explosion analysis
• Facility Siting modelling and Report
• Vent Dispersion and Flare radiation analysis
• Fire risk assessments (FRA)
• Fire and gas mapping study (F&G)
• Passive Fire protection analysis (PFP)
• H2S mapping and sour facility classification
• Firefighting and Life Saving Equipment layout
• Quantitative Risk assessment (QRA)
• Active fire protection – Fire water & Foam system design
• Emergency Escape and evacuation Philosophy
• HSE action and concern register
• ALARP demonstration report

Software’s To Be Used In The Job

• SHELL FRED & SHEPHERD
• DNV PHAST & SAFETI
• INSIGHT NUMERICS DETECT 3D
• FLARESIM
• PIPENET

Desired Candidate Profile

• Degree in Engineering (Chemical / Petrochemical)
• 3+ years of Experience with minimum 1 year in hydrocarbon industry, including design/operations support.
• Experience in Safety in Design, Risk management, HAZOP, QRA, F&G Mapping Study.

Other Details

• Salary: TBA
• Contract Type: Permanent Position.
• Visa Status: Single
• Accommodation Type: Company Accommodation on Sharing Basis.

Job Location

Muscat, Oman

No. of Vacancies

2

Apply now using below form

Elixir Careers Form

Applying for

• Select - Account and Finance
  Administration
  Asset Integrity Engineer
  Civil and Structural Designer and Draftsman
  Civil and Structural Engineer
  Cost Estimation Engineer
  Digital Marketing Engineer
  Document controller
  Electrical Designer and Draftsman
  Electrical Engineer
  Engineering Manager
  Environmental Engineer
  HAZOP Chairman
  HR and Recruiter
  Instrumentation Designer and Draftsman
  Instrumentation Engineer
  IT System Admin
  Mechanical Engineer (Rotating Equipment)
  Mechanical Engineer (Static)
  Piping Designer and Draftsman
  Piping Engineer
  Process and Proposal Engineer
  Process Designer and Draftsman
  Process Engineer
  Process Safety Engineer
  Project Engineer
  Project Manager
  Proposal Engineer
  Sales and Marketing Engineer
  SEO Specialist
  Web Developer

Name

Email

Phone/Mobile

Confirm

I hereby declare that the information furnished above is true to the best of my knowledge.

• Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
• Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice
• Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
• Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.
• Workmen’s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.
• Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being.
  
  

• Execute technical work for FEED and Detailed Designs (designs, specifications, drawings, etc.) within designated CTR scopes
• Implement, practice and Monitor Quality Management System (QMS) in FEED office projects in line with ISO API Q2 2nd edition requirements
• Carry out appropriate discipline and inter discipline checks and reviews of engineering and design work
• Remain engaged in design issues throughout the design development of the project
• Create demonstrable value for customers by understanding their drivers and critical success factors
• Capture/apply internal and external learning’s and incorporate improvements
• Deliver continuously improving performance, benchmarked as top tier in the industry
• Time write correctly each week based on project involvement
• Ensure own discipline engineering and design work are successfully delivered and appropriate reviews conducted
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation and reliability of designs
• Contribute to excellent HSE/AIPSM performance throughout the engineering phase of the project life cycle
• Maintain effective interfaces and relationships within/between disciplines, and peers in other EP Projects teams and Assets
  
  

• Minimum 3 years in FEED/ENGINEERING Experience and HSE (TSE) role
• Engineering degree or technical equivalent
• Be a team player where recognition of team performance as a whole is a greater priority than projecting individual contribution
• Be able to work in a team environment and handle multiple project responsibilities
• Assuring that work and project promises are successfully delivered and appropriate reviews have been conducted
• Establishing and maintaining engineering processes, systems and tools (software)
• Able to prepare HSE (TSE) study reports and engineering drawings
  
  

Key Competencies

• Knowledgeable in Process Safety and Equipment design.
• Should be able to read PFS/ PSFS /P&IDs
• Report Preparation for Safety Studies

Scope Of Responsibilities & Primary Duties

• DEM 1 / DEM 2 Identification & compliance report
• HSE philosophy
• HAZID, DR & HAZOP workshop
• HAZID, Design review and HAZOP close out
• Hazardous area classification schedule and layout
• Fire protection design basis
• SCE identification and Performance standards
• VCA & HFE workshop Closeout
• Fire , gas , dispersion and Explosion analysis
• Facility Siting modelling and Report
• Vent Dispersion and Flare radiation analysis
• Fire risk assessments (FRA)
• Fire and gas mapping study (F&G)
• Passive Fire protection analysis (PFP)
• H2S mapping and sour facility classification
• Firefighting and Life Saving Equipment layout
• Quantitative Risk assessment (QRA)
• Active fire protection - Fire water & Foam system design
• Emergency Escape and evacuation Philosophy
• HSE action and concern register
• ALARP demonstration report

Software's To Be Used In The Job

• SHELL FRED & SHEPHERD
• DNV PHAST & SAFETI
• INSIGHT NUMERICS DETECT 3D
• FLARESIM
• PIPENET

Desired Candidate Profile

• Degree in Engineering (Chemical / Petrochemical)
• 3+ years of Experience with minimum 1 year in hydrocarbon industry, including design/operations support.
• Experience in Safety in Design, Risk management, HAZOP, QRA, F&G Mapping Study.

Other Details

• Salary: TBA
• Contract Type: Permanent Position.
• Visa Status: Single
• Accommodation Type: Company Accommodation on Sharing Basis.

Job Location

Muscat, Oman

No. of Vacancies

2

Apply now using below form

Elixir Careers Form

Applying for

• Select - Account and Finance
  Administration
  Asset Integrity Engineer
  Civil and Structural Designer and Draftsman
  Civil and Structural Engineer
  Cost Estimation Engineer
  Digital Marketing Engineer
  Document controller
  Electrical Designer and Draftsman
  Electrical Engineer
  Engineering Manager
  Environmental Engineer
  HAZOP Chairman
  HR and Recruiter
  Instrumentation Designer and Draftsman
  Instrumentation Engineer
  IT System Admin
  Mechanical Engineer (Rotating Equipment)
  Mechanical Engineer (Static)
  Piping Designer and Draftsman
  Piping Engineer
  Process and Proposal Engineer
  Process Designer and Draftsman
  Process Engineer
  Process Safety Engineer
  Project Engineer
  Project Manager
  Proposal Engineer
  Sales and Marketing Engineer
  SEO Specialist
  Web Developer

Name

Email

Phone/Mobile

Confirm

I hereby declare that the information furnished above is true to the best of my knowledge.

• Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
• Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice
• Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
• Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.
• Workmen's Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.
• Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being.
  
  

• Execute technical work for FEED and Detailed Designs (designs, specifications, drawings, etc.) within designated CTR scopes
• Implement, practice and Monitor Quality Management System (QMS) in FEED office projects in line with ISO API Q2 2nd edition requirements
• Carry out appropriate discipline and inter discipline checks and reviews of engineering and design work
• Remain engaged in design issues throughout the design development of the project
• Create demonstrable value for customers by understanding their drivers and critical success factors
• Capture/apply internal and external learning's and incorporate improvements
• Deliver continuously improving performance, benchmarked as top tier in the industry
• Time write correctly each week based on project involvement
• Ensure own discipline engineering and design work are successfully delivered and appropriate reviews conducted
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation and reliability of designs
• Contribute to excellent HSE/AIPSM performance throughout the engineering phase of the project life cycle
• Maintain effective interfaces and relationships within/between disciplines, and peers in other EP Projects teams and Assets
  
  

• Minimum 3 years in FEED/ENGINEERING Experience and HSE (TSE) role
• Engineering degree or technical equivalent
• Be a team player where recognition of team performance as a whole is a greater priority than projecting individual contribution
• Be able to work in a team environment and handle multiple project responsibilities
• Assuring that work and project promises are successfully delivered and appropriate reviews have been conducted
• Establishing and maintaining engineering processes, systems and tools (software)
• Able to prepare HSE (TSE) study reports and engineering drawings
  
  

• Experience Leading Process Safety & related projects for Petch & Refinery
• Experience in developing process safety concepts, designing safety systems, and ensuring that designs meet regulatory requirements and industry standards.
• Experience in project management, including budgeting, scheduling, resource allocation, and coordination with other engineering disciplines and project stakeholders
• Strong experience leading techniques for ensuring data integrity with various integration of information/ reports
• Experience leading process Safety project plans, including schedules, budgets, and resources
• Experience in developing and implementing process safety management systems, conducting audits, and driving continuous improvement in process safety performance.

Knowledge / Background:

• Deep understanding of process safety principles, regulations, codes, and standards, and the ability to apply this knowledge to design, optimize, and troubleshoot process safety systems.
• Proficient in conducting process hazard analyses (PHA), risk assessments, and developing risk management plans to minimize process safety hazards.
• Background in promoting and enhancing a safety culture within the organization, ensuring that all personnel are aware of and comply with process safety requirements.
• Continuous improvement: The Lead Engineer Process Safety should have
• Sound judgment in technical matters with good skills in engineering field materials specifications, integrity inspection, plant design optimization/modification and applicable code & standards.
• Solid knowledge of OQ RPI Process Safety Framework
• HSE (Knowledge of HAZOPS, Safety Studies and Risk Analysis or similar studies.
• Knowledge of maintenance best practices
• Refinery commissioning and start-up.
• Permit to Work (PTW), Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response)
• Understanding of Process Plant (P&ID / PFD) & Engineering drawings and OEM manuals.

Technical:

• Computer knowledge in MS Office applications like MS Word, MS Excel, etc.
• SAP (PM & MM & FM Modules) Computerized Maintenance Management Systems (CMMS)
• Software applications like HAZpro, INTELEX, and PI
• Engineering field materials specifications and international standards.
• Technical writing to write clear, concise, and accurate reports, procedures, and other technical documents related to process safety.
• Understanding of process safety principles and the ability to apply them in a practical and effective manner.
• SOP interpretation
• Process Hazard Analysis (PHA)
• Hazard and Operability Study (HAZOP)
• Safety Integrity Level (SIL) study
• Layers of Protection Analysis (LOPA)
• Lead the implementation of Process Safety policies, systems, procedures and guidelines for RPI & Plastic assets considering lessons learned, best practices and standards to ensure the work is effectively and efficiently.
• Lead the development of Process Safety project plans, including schedules, budgets, and resources.
• Ensures that all work is conducted in compliance with relevant regulatory requirements and industry standards.
• Ensure that there is a consistent strategy to manage Process Safety Barriers for all RPI assets including identification, operations, maintenance, etc. across facilities and plants as part of Mechanical Integrity System.
• Ensure requirements for safe operating procedures include document generation and upkeep.
• Ensure competency assurance and compliance as part of Process Safety Barriers Management.
• Ensure Risk management Audits & Reports and Projects
• Consolidate the process Safety performance for RPI and prepare consolidated reports including recommendations for improvement of process safety management.
• Interface with Audits and relevant authorities for compliance of Process safety plans / works.
• Ensure availability of processes governing Hazard Analysis (PHA), e.g., Hazard and Operability Study (HAZOP), Safety Integrity Level (SIL) study, Quantitative Risk Assessment (QRA), Layers of Protection Analysis (LOPA) and other risk evaluation studies and Process Safety workshops for existing and new facilities. Ensuring Compliance to those Processes.
• Ensuring that solutions are technically sound and meet quality standards.
• Execute programs to improve Process Safety culture and monitor the improvement of Process Safety culture across Duqm; provide updates, guidance, and clarifications on existing laws and regulations regarding Process Safety related issues and advice on establishing the best practice standards.
• Lead Process Safety incidents investigations and follow-up for RPI assets.
• Lead site-wide PHA, HAZOP, LOPA, SIL, and QRA studies as required.
• The lead engineer is responsible for liaising with stakeholders, including clients, contractors, and suppliers, to ensure that project objectives are met and that expectations are managed effectively.
• Focal Point for interface with process risk management audits and their follow-up on the areas for improvement as required for proper implementation.
• Provides technical guidance and expertise to the process safety team, and for ensuring that technical issues are resolved in a timely and effective manner.
• Provide technical specific guidance and support on process safety issues during the concept, FEED, Engineering, construction, commissioning, operational and decommissioning phases of plants/facilities/projects in RPI.
• Provide guidance on-site consultations on process safety issues and ensure accountability of all PSM requirements.

Join to apply for the Lead Process Safety Engineer role at Wood

Wood is currently hiring for Lead Process Safety Engineer for our project in Sohar, Oman.

Purpose of the role: To provide expert leadership in ensuring that Process Safety Risks are effectively managed across OQ RPI facilities (Refineries and Petrochemicals). This involves developing and maintaining a solid Process Safety Governance framework, including procedures, regulations, and best practices, through:

1. Developing, maintaining, and improving the framework, procedures, standards, and guidelines related to Process Safety, aligning OQ RPI practices with industry standards.
2. Carrying out regular maturity assessments and monitoring compliance.
3. Managing risks through framework development and risk registers.
4. Developing process safety performance indicators and ensuring proper reporting.

The position will operate in accordance with the Group’s Mission, Vision, Values & Strategies, supported by an IT platform, HSE standards, legal requirements, and international best practices, aligned with national objectives.

• Lead the implementation of Process Safety policies, systems, and procedures for RPI & Plastic assets, considering lessons learned, best practices, and standards to ensure effective and efficient work.
• Develop project plans for process safety initiatives, including schedules, budgets, and resources.
• Ensure compliance with relevant regulations and industry standards.
• Manage Process Safety Barriers across all RPI assets, including identification, operations, and maintenance, as part of Mechanical Integrity Systems.
• Ensure safe operating procedures are documented and maintained.
• Ensure competency and compliance in Process Safety Barrier Management.
• Conduct risk management audits and reports, and oversee projects.
• Consolidate process safety performance data for RPI and prepare improvement reports.
• Interface with audits and authorities for compliance.
• Oversee hazard analysis processes such as HAZOP, SIL studies, QRA, and LOPA, ensuring compliance and effectiveness.
• Lead incident investigations and follow-ups.
• Lead safety studies and risk assessments for existing and new facilities.
• Provide technical guidance and support throughout project phases.
• Coordinate with stakeholders including clients, contractors, and suppliers.
• Lead process safety culture improvement programs.

• 10+ years of relevant experience.
• Experience leading process safety projects in petrochemical and refinery environments.
• Proficiency in developing safety concepts, designing safety systems, and ensuring regulatory compliance.
• Strong project management skills, including budgeting and scheduling.
• Experience with process hazard analyses and safety management systems.

• Deep understanding of process safety principles, standards, and regulations.
• Experience in risk assessments and hazard analyses.
• Background in safety culture and continuous improvement.
• Knowledge of process plant drawings, OEM manuals, and safety standards.

• Proficiency in MS Office, SAP modules, and safety software tools.
• Ability to produce clear technical documentation.
• Experience with PHA, HAZOP, SIL, QRA, and LOPA studies.

Wood is a global leader in consulting and engineering, operating in 60 countries with around 35,000 employees. Visit for more information.

We are an equal opportunity employer committed to diversity and inclusion. All qualified applicants will be considered without regard to race, color, age, religion, gender, national origin, disability, sexual orientation, gender identity, veteran status, or other characteristics as per applicable laws.

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Engineering and IT
• Industries: Professional Services

Referrals increase your chances of interviewing at Wood by 2x.

Sign in to set job alerts for “Process Safety Engineer” roles.

Our client is a leading multidisciplinary engineering consultancy specialising in oil and gas engineering across upstream, downstream, and midstream sectors. They also offer EPC services on large-scale contracts.

Due to new project work on a Sour Gas Facility, our client is seeking 3 Technical Safety Engineers for a 3-4 month contract in Muscat, Oman.

• Implement project HSSE and SP strategies
• Conduct Physical Effects Modelling and Quantitative Risk Assessments
• Utilise software such as FRED and SHEPHERD
• Apply safety case regulations and ALARP principles
• Facilitate hazard workshops (HAZOP, HAZID, SIL, Bow-Ties, ALARP, SIMOPs)
• Develop ALARP demonstrations for Process Safety risks
• Participate in project work from design to manufacturing, construction, installation, and production

Any

• Degree in Chemical or Mechanical Engineering
• Minimum of 7 years’ experience, with at least 5 years in Technical Safety
• Sour Gas project experience is preferred
• Experience in QRAs
• Oil and Gas industry experience

AustCorp Executive Recruitment, established in 1996, is committed to integrity and ethical recruitment. With offices in Sydney, Perth, Singapore, and London, AustCorp specializes in recruiting senior leadership, technical, and business development professionals across various sectors including Mining, Oil & Gas, Environmental & Carbon, Manufacturing, Construction, Water & Energy, Professional Services, Orthopaedics & Medical Devices, and IT & Digital Media.

Join to apply for the IG MEET Lead Process Safety Engineer role at Air Products .

At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate, and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we build tomorrow by being the safest, most diverse, and most profitable industrial gas company in the world.

• Lead regional process safety standards, design tools, and work processes.
• Facilitate process safety hazard reviews, applying risk-based criteria to prioritize assessments and actions.
• Conduct Pre-Start Up Safety reviews and ORIs for projects in IG Plants/Businesses.
• Perform process hazard analyses and risk assessments, tracking and assisting with recommendations.
• Provide technical advice on process safety issues to stakeholders, including management, engineering, and operations teams.
• Drive process safety improvements by analyzing incident and near-miss trends.
• Lead regional incident Root Cause Analysis.
• Manage process safety improvement projects and train plant teams.
• Lead HAZOP studies for plant upgrades and approve change notices ('eMOCs').
• Support new plant design and process technology optimization during project development.
• Assist during technical due diligence and post-acquisition safety integration.
• Collaborate with plant management to ensure up-to-date PSM systems.

• Bachelor's degree in chemical, petroleum, or process safety engineering or related field.
• 10+ years of relevant experience in petrochemical, oil & gas industry, with at least 5 years in a process safety role.
• Experience in industrial gas manufacturing or oil & gas production preferred.
• Strong understanding of process safety management, risk management, and regulations.
• Experience with risk assessment tools like LOPA, and software such as PHAST, HYSYS, Flarenet, etc.
• Excellent communication skills to convey safety protocols and influence stakeholders.

Must be willing to travel regionally, demonstrate safety leadership, and mentor teams. Air Products values safety, diversity, and inclusion. To learn more, visit About Air Products.

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Engineering and IT
• Industry: Chemical Manufacturing

This job is active and accepting applications.

Join to apply for the IG MEET Lead Process Safety Engineer role at Air Products .

At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate, and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we build tomorrow by being the safest, most diverse, and most profitable industrial gas company in the world.

• Lead regional process safety standards, design tools, and work processes.
• Facilitate process safety hazard reviews, applying risk-based criteria to prioritize assessments and actions.
• Conduct Pre-Start Up Safety reviews and ORIs for projects in IG Plants/Businesses.
• Perform process hazard analyses and risk assessments, tracking and assisting with recommendations.
• Provide technical advice on process safety issues to stakeholders, including management, engineering, and operations teams.
• Drive process safety improvements by analyzing incident and near-miss trends.
• Lead regional incident Root Cause Analysis.
• Manage process safety improvement projects and train plant teams.
• Lead HAZOP studies for plant upgrades and approve change notices ('eMOCs').
• Support new plant design and process technology optimization during project development.
• Assist during technical due diligence and post-acquisition safety integration.
• Collaborate with plant management to ensure up-to-date PSM systems.

• Bachelor's degree in chemical, petroleum, or process safety engineering or related field.
• 10+ years of relevant experience in petrochemical, oil & gas industry, with at least 5 years in a process safety role.
• Experience in industrial gas manufacturing or oil & gas production preferred.
• Strong understanding of process safety management, risk management, and regulations.
• Experience with risk assessment tools like LOPA, and software such as PHAST, HYSYS, Flarenet, etc.
• Excellent communication skills to convey safety protocols and influence stakeholders.

Must be willing to travel regionally, demonstrate safety leadership, and mentor teams. Air Products values safety, diversity, and inclusion. To learn more, visit About Air Products.

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Engineering and IT
• Industry: Chemical Manufacturing

This job is active and accepting applications.