24 Jobs in Thumrait

Overview

The Vehicle Operations Supervisor supervises all aspects of reconstitution, preservation and maintenance of USAF vehicle assets. Carries out all duties in accordance with USAF mandatory requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).

Responsibilities

• Ensures reconstitution, preservation and inspection goals are attained.
• Ensures work is carried out in accordance with priorities, goals and schedules.
• Ensures Limited Technical Inspections (LTI's) are performed within prescribed guidelines.
• Supervises the inspection and preparation of USAF vehicle assets for air/land/sea movement.
• Ensures safety practices and housekeeping standards are maintained to the highest standard.
• Ensures that all tools and equipment are serviceable, accounted for and secured.
• Stores and disposes of all hazardous materials in accordance with Amentum Standard Operating Procedures (SOPs) and the rules and regulations of the host country.
• Responsible for the quality of parts research and ensures that only required repair parts are requested to include the local availability of parts and services.
• Oversees Time Compliance Technical Order (TCTO) actions and service bulletins to ensure completion within prescribed guidelines.
• Ensures correct and expeditious completion of work orders.
• Utilizes the management reports from DPAS to effectively manage the GPMS fleet.
• Ensures that complete inspections are performed on all completed vehicle repairs to ensure a quality product is delivered to the customer.
• Ensures all unused serviceable repair parts are returned to the supply facility and removed XF3 parts are turned back over to supply to clear the DIFM Account.
• Verifies all Vehicle Down for Parts (VDP) decisions and monitors cannibalization requirements.
• Inspects/ensures the quality of work performed by subcontractors and reports all deficiencies to the Superintendent and the Contracting Office.
• Monitors job performance ensures staff training and is adequate for the task.
• Recommends and or provides additional training when it is determined necessary.
• Assists Vehicle Superintendent in managing CFV and In-Use vehicle fleet.
• Provides supervision over maintenance and repair of CFV and In-Use vehicle fleet.
• Performs other duties as assigned.
• Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.

Minimum Requirements

• Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs.
• Must be capable of operating and repairing light to heavy military and commercial type vehicles.
• Must have working knowledge of diagnostic computer programs such as Cummins INSITE, CAT, OBD scanners.
• Will have good organizational and communication skills, particularly in dealings with subordinates.
• Must possess a valid home country driver's license and ability to obtain host nation driver's license.
• May be required to operate material handling equipment.
• High School diploma or equivalent required.
• Recognized national qualification in vehicle maintenance at a higher level required.
• Seven years' experience in USAF or US service equivalent vehicle and equipment repair required.
• May be exposed to extreme noise from operating equipment.
• Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.
• Ability to travel domestically and internationally.

Preferred Qualifications

• DPAS M&U Experience preferred.
• 60k loader certification preferred.
• Two years' experience in a supervisory capacity preferred.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation.

Seniority level

• Mid-Senior level

Employment type

• Full-time

Job function

• Management and Manufacturing

Industries

• Defense and Space Manufacturing

#J-18808-Ljbffr

Join or sign in to find your next job

Join to apply for the Fabrication Technician role at Amentum

1 month ago Be among the first 25 applicants

Join to apply for the Fabrication Technician role at Amentum

The Fabrication Technician maintains packs and inventories prefabricated modular metal soft wall/hard wall structures, wooden, masonry and associated equipment. Performs sheet metal skin repairs to shelter equipment and fabricates repairs to components of shelter and utility systems. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).

Principal Accountabilities

• Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, and reconstitutes BEAR order of Battle (BOB) assets/equipment in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.
• Performs inspections, maintenance and repairs on ferrous and non-ferrous metal prefabricated shelter structures to include the assembly and dismantling of shelters.
• Implements sheet metal repair schemes to container internal and external skins. Orders and fits replacement structural components.
• Performs repair tasks including the fabrication of patches, minor panel beating and filing the replacement of riveted nuts, cam locks and hi-loc rivets and nut plates.
• Prepares and completes documentation including Word Orders, USAF Supply and Amentum forms and updates Maximo.
• Prepares assets/equipment for air/sea/road haul shipments IAW Technical Orders, Manuals, Checklist, Regulations, Maintenance Action Sheets and UTC Configuration listings.
• Performs servicing and/or maintenance of in-use assets as required.
• Repairs, inspects, cleans, operates and maintains contingency plumbing facilities such as Laundry, Kitchen, Latrines and Showers.
• Fabricates and repairs wooden storage and shipping containers and supports related trades in all aspects pertaining to sheet metal and carpentry requirements.
• May be required to assist in other departments when directed or requested to accomplish a specific task or project.
• Performs other skilled or unskilled jobs as directed by the Supervisor and/or as directed by Amentum/USAF tasking.
• Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.
• Operates material handling equipment as required.
• Ensures all tools, personnel protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.
• Conforms to Amentum/USAF safety, hazardous materials and quality standards.
• Assists in the erection, construction and operation of BEAR shelter systems and associated equipment to support real world exercises and contingencies.
• Performs other duties as assigned.
• Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.
  
  

Minimum Requirements

• Must have organizational skills and be able to understand, speak, read and write English at a beginner level.
• Must be able to read and understand technical data, measurements and engineering drawings for construction, repair of portable building facilities and operating instructions pertaining to Civil Engineering and BOB assets and related equipment or similar Department of Defense Agencies.
• Must possess a valid home country driver's license and ability to obtain host nation driver's license.
• Will be required to operate material handling equipment.
• High School diploma or equivalent required.
• May be exposed to extreme noise from operating equipment.
• Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.
• Must be able to travel domestically and internationally.
  
  

Preferred Qualifications

• Maximo experience preferred.
• Five years of Military or civilian experience in the field of structural/facilities maintenance preferred.
• Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred.
  
  

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Seniority level

• Seniority level Entry level

Employment type

• Employment type Full-time

Job function

• Job function Engineering and Information Technology
• Industries Defense and Space Manufacturing

Referrals increase your chances of interviewing at Amentum by 2x

Get notified about new Fabrication Technician jobs in Thumrait, Dhofar Governorate, Oman .

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Responsibilities:

1. Perform on and off aircraft and equipment electrical and environmental systems maintenance, including troubleshooting, repairing, and adjusting components.
2. Conduct scheduled and unscheduled aircraft maintenance on and off equipment.
3. Service aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen.
4. Launch and recover aircraft, including tie-down, cover, plug and pin removal and installation, marshaling, and assisting with pilot preflight procedures.
5. Operate GSE, flight line vehicles, and other support equipment as required.
6. Order aircraft and equipment parts.
7. Assist in aircraft and equipment movement and conduct flight line foreign object prevention walks.
8. Complete maintenance documentation using IMDS and required forms.
9. Be willing to train in other aircraft maintenance tasks as needed.
10. Practice good housekeeping, tool control, FOD awareness/prevention, and safety at all times.
11. Assist in the upkeep of assigned facilities and grounds as required.
12. Perform other duties as assigned.

Experience and Education:

• Minimum of 5 years of experience with F-16 Block 40 aircraft.
• High School Diploma or equivalent.

Additional Information:

Amentum is an Equal Opportunity Employer. We provide equal employment opportunities regardless of race, sex, sexual orientation, pregnancy, age, ancestry, military or veteran status, color, religion, creed, marital status, medical condition, genetic information, national origin, citizenship, income level, or disability. For more information on your rights, visit the links for EEO including Disability/Protected Veterans and Labor Laws Posters.

#J-18808-Ljbffr

Overview

The QA/QC Inspector performs internal audits to ensure compliance with Company Quality Management System. Ensures audit findings are correct and recommendations for corrective and/or preventive action(s) are appropriate. Performs technical and visual inspections towards the reconstitution, preservation and maintenance of all assets. Develops and monitors Quality Control, Safety and Environmental Programs in support of subject area. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).

Principal Accountabilities

• Ensure internal audits are conducted of actual practices against published policies, standards, procedures, regulatory guidance, contract and processes.
• Ensure corrective action and preventive action submitted by site meet QMS requirements.
• Prepare trend analysis reports of various quality indicators as required by Company Quality Management System.
• Ensures cross-tell is being conducted between shops and sites for non-conformances.
• Coordinates with other departments and PSO for standardization of processes and procedures.
• Inspects all repairs, replacement of parts and assemblies, realignments and adjustments.
• Ensures the completion of maintenance forms such as work orders, parts request sheets and maintenance sheets and trains others in the proper documentation procedures.
• Records data such as hours worked, work performed, parts used and ensures complete and correct completion of work orders.
• Ensures safety practices and housekeeping are maintained to the highest standard.
• Checks all repairs to ensure the highest quality repair standards are met.
• Checks to make sure that only current up-to-date Technical Orders and commercial manuals are used when repairing items.
• Performs random In-Process and Final Product inspections on all Production, Inspection and Maintenance operations.
• Randomly reviews production and inspection schedules, work orders and historical records to ensure accuracy and timely completion.
• Performs random inspections on tools, shop equipment, safety equipment and protective clothing.
• Reviews and evaluate work processes and facilities to ensure compliance with ISO 9001.
• Ensure internal audits are conducted of actual practices against published policies, standards, procedures, regulatory guidance, contract and processes.
• Ensure audit findings are correct and that recommendations for corrective and/or preventive action(s) are appropriate and conform to Amentum quality standards.
• Ensure cross-tell is being conducted between shops and sites for non-conformances.
• Monitors workshop practices and housekeeping to identify discrepancies and negative trends that affect technical performance.
• Performs other duties as assigned.
• Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.

Minimum Requirements

• Must have outstanding customer service and organizational skills and be able to understand, speak, read and write English at an advanced level.
• Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Teams, Power Point, Excel and Word programs.
• Should be capable of producing Analysis Reports and Spreadsheets.
• Must be familiar with OSHA/AFOSH Standards and Industrial safety practices.
• Must be conversant with USAF Technical Order and publications system.
• Ability to interpret and implement procedures for compliance with ISO 9001 Standards is essential.
• Must successfully pass Internal Auditor course (QA auditors).
• Conversant with USAF Technical Order and publications system is required.
• Must possess a valid home country driver's license and ability to obtain host nation driver's license.
• High School diploma or equivalent.
• Five years of related maintenance actions required.
• Two years' experience in a Quality Assurance or Quality Control is required.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 20 lbs.
• Ability to travel domestically and internationally.

Preferred Qualifications

• Knowledge and experience of Training and Instructional Techniques is desirable.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Seniority level

• Mid-Senior level

Employment type

• Full-time

Job function

• Quality Assurance

Industries

• Defense and Space Manufacturing

Referrals increase your chances of interviewing at Amentum by 2x

Get notified about new Quality Assurance Quality Control Inspector jobs in Thumrait, Dhofar Governorate, Oman.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

The CE Supervisor is responsible for managing storage and maintenance activities for Bear order of Battle (BOB) and Civil Engineering (CE) equipment to include receipt, accountability, storage, inspection, maintenance, issue and reconstitution. Supervise CE workshops and facilities (e.g., power production, electrical, refrigeration, fabrication shops etc.). Direct preparation of stored assets for exercise or actual deployments. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).

Principal Accountabilities

• Performs CSC Inspections on Containers as needed.
• Coordinates, Oversees and Monitors periodic inspections and maintenance services on assigned assets in the Bear Base Departments.
• Coordinates, Oversees and Monitors civil engineering and other equipment for exercises or actual deployments in the Bear Base Departments.
• In the absence of the Power Production Supervisor operates, maintains, troubleshoots and repairs power generation equipment and related power generation duties.
• Performs TDY within the area of operations as required.
• In coordination with the Bear Base Superintendent schedules and coordinates with the Work Control all shop work assignments.
• Responsibility as foreman of maintenance facilities and shops.
• Instructs and trains supervisory personnel in maintenance repair techniques, inspects their work performance and documents training records. Conducts training on quality assurance, safety, Safety Data Sheets, security awareness and other subjects in accordance with appropriate plans.
• Inspects Hazardous Materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.
• Performs other duties as assigned by the Superintendent or Site Manager.
• As alternate Bear Base Superintendent, performs all duties of that position during the temporary absence of the incumbent listed below
• Receives, manages, accounts for stores; inspects and maintains equipment and assets.
• Stocks and maintains parts, tools and supplies to perform required work on assets, requisitioning additional tools and parts as needed.
• Responds to inquiries concerning storage and status of assigned equipment.
• Plans, develops and implements procedures for all Bear Base technical work.
• Coordinates the erection and construction of Bear Base assets to support real world exercises and contingencies.
• Evaluates employees work performance, resolve personnel related problems and initiate action to correct substandard performance by personnel and determine logistic support.
• Research assets/equipment discrepancies and identifies them to the customer.
• Reviews Standard Basis Supply System (SBSS), supply documents to verify status of parts.
• Reviews C49 to verify status of parts.
• Submits the local purchase supply documents to procure item such as test and shop equipment, consumables, etc.
• Reviews and inventories Organizational Equipment Listings (OEL) and Contract Data Requirement Lists (CDRL) for the department.
• Performs other duties as assigned.
• Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.

Minimum Requirements

• Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs.
• Ability to read, understand and interpret all technical data associated with Civil Engineering and BOB assets and related equipment required.
• Must be able to obtain CSC Certification.
• Must possess a valid home country driver's license and ability to obtain host nation driver's license.
• Will be required to operate material handling equipment.
• High School diploma or equivalent required.
• Background in mechanical/electrical equipment maintenance required.
• Requires experience in the operations and maintenance of electrical power production equipment and associated equipment.
• Five years' experience with CE equipment and engineering workshop facilities required.
• Five years' experience in an equipment management or CE equipment supervisory position and demonstrated understanding of Bear Base required.
• May be exposed to extreme noise from operating equipment.
• Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.
• Must be able to travel domestically and internationally.

Preferred Qualifications

• Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

#J-18808-Ljbffr

Overview

The Traffic Management Specialist arranges the shipment of Pre-positioned Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land and sea. The incumbent must comply with all applicable International and Federal Transportation Laws, Regulations, Tariffs and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Integrated Logistics System - Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking system such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS).

Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).

Principal Accountabilities

• Inspects, accepts documentation (DD Form 1149/1348-1), prepares and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).
• Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.
• Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.
• Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and maintains manifest logs.
• Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.
• Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulations, IATA and IMDG).
• Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).
• Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.
• Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.
• Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.
• Processes Export Traffic Release Requests (ETRR) for sealift shipments using SDDC - IBS.
• Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.
• Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity, description, freight classification, required delivery date, priority or other special requirements.
• Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.
• Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting and maintaining operation stock levels of 463L pallets, nets and other tie-down equipment located on-site.
• Assists the WPM Custodian with inspecting and certification, record keeping and reporting the receipt and usage requirements.
• Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.
• Reports all lost, damaged, destroyed and modified containers to the CCO within 12 hours of discovery.
• Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.
• Receives/Ships all containers in JCM within 12 hours of receipt or departure.
• Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.
• Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.
• Inspects cargo documentation, conducts Joint Inspections and certifies that cargo is built correctly and airworthy.
• Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo and baggage.
• Determines cargo configuration and aircraft loading requirements in accordance with ATTLA.
• Loads, unloads and services aircraft. Ensure cargo loads are secure and tied down. Assists load team chef with selecting, assembling, palletizing and transporting cargo loads to and from aircraft and storage areas.
• Safely transports and handles explosives.
• Performs passenger service procedures, check-in, manifest passengers and baggage and perform security checks. Loads/unloads passengers and baggage from aircraft.
• Performs weighing of cargo, vehicles and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.
• Implements, documents and controls quality, training, environment and safety programs.
• Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders and procedures.
• Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN IAW with regulation.
• Maintains Technical Orders, publications, forms and files required for Traffic Management operations.
• Compiles data and submits reports and other correspondence as required.
• Performs other duties as assigned.
• Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.

Minimum Requirements

• Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include PowerPoint, Excel and Word programs.
• Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.
• Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.
• Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.
• Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining COMSEC, OPSEC and COMPUSEC.
• Knowledge and understanding of MHE equipment operations and associated hazards required.
• Will be required to receive training and operate material handling equipment.
• Must possess a valid home country driver's license and ability to obtain host nation driver's license.
• Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.
• Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air, data records, container management, customer service, cargo operating computer systems or other related experience.
• Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.
• Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
• Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.
• Ability to travel domestically and internationally.

Preferred Qualifications

• Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint preferred.
• Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy, age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Seniority level

• Entry level

Employment type

• Full-time

Job function

• Marketing, Public Relations, and Writing/Editing
• Industries

Defense and Space Manufacturing

#J-18808-Ljbffr

The Calibration Advisor is the resident expert in his field that will provide engineering/consultant services to the Royal Omani Air Force (RAFO). This position will provide services of operating, maintaining, troubleshooting, repairing and calibrating equipment. Assists in the development and implementation of a QA Program as required.
**Responsibilities:**
+ Calibration of inspection, measurement and test equipment (IM&TE) for the following disciplines - Electronics (including DC & Low Frequency, RF & Microwave, RF Power, Phase Noise, IFF/TACAN, Phase, Time & Waveform), physical-mechanical and Biomedical - to ensure compliance with published specifications in these fields
+ Maintain primary and/or intrinsic standards
+ Maintain secondary and/or working standards
+ Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
+ Inspect and evaluate new calibration standards for proper operation before releasing them to the calibration laboratory
+ Recommend IM, TE and standards for use in measurement and calibration applications
+ Adapt existing calibration equipment, standards and techniques to accomplish unique measurement tasks for which they may not be principally used
+ Apply engineering knowledge to design and development of calibration methods, fixtures, and IM&TE not commercially available
+ Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
+ Design and document measurement reference material for laboratory use
+ Provide technical advice to other sections with the Royal Air Force of Oman (RAFO)
+ Generating or adapting equipment and technology to serve user needs
+ Any other tasks as directed by Program Management and SO2 ENG Cal
**Minimum Requirements**
Required minimum training must be equivalent to USAF level PMEL technical schools or civilian trade school plus similar OJT/apprentice type upgrade training
Minimum of eight (8) years of work experience operating, maintaining, troubleshooting, repairing and calibrating electronic precision measurement equipment and calibration laboratory reference standards.
**Preferred Requirements:**
Requires an associate's degree in electrical engineering, engineering technology, physics or related technical field from an accredited college or university
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

**Position Summary:**
**The** **Avionics Technician (F-16 Block 50+)** Fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: Area Surveillance, Telemetry, Radar, or Global Positioning System (GPS) Metric Track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.
**Job Description:**
+ Perform or supervise functions involving installation, repair, testing, and modification on NAV Attack, Flight Controls Radar, SMS, Comm/Nav and ECM systems.
+ Operates avionics systems by using aircraft controls to determine operational condition.
+ Interprets equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.
+ Uses technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.
+ Removes and installs components Performs and supervises alignment calibration and bore sight of avionics systems Uploads operational software into system components
+ Inspects, analyzes and evaluates avionics systems Interprets inspection findings and determines adequacy of corrective actions.
+ Reviews maintenance management publications and procedures Recommends methods to improve equipment performance and maintenance procedures.
+ Performs OJT and instruction, supervises and accepts work performed by RAFO technicians
**Minimum Requirements:**
+ 5 years F-16 Bock 50+ or 8 years supporting F-16 aircraft.
+ AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 Integrated Avionics or equivalent
+ Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up Avionics systems.
+ Must be willing to train to other aircraft maintenance tasks as required.
+ High School Diploma
**Clearance Requirements:**
+ Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.
**Physical/Preferred Qualifications:**
+ Frequently lifts parts and equipment up to 25 pounds.
+ Occasionally lifts objects up to 50 pounds.
+ Most heavy lifting is accomplished through the use of mechanical devices.
+ Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area.
+ While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.
+ The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.
+ The employee is occasionally required to sit, climb, or balance.
+ Knowledge of military and/or company forms required by work specifications is a plus.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

The **CE Supervisor** is responsible for managing storage and maintenance activities for Bear order of Battle (BOB) and Civil Engineering (CE) equipment to include receipt, accountability, storage, inspection, maintenance, issue and reconstitution. Supervise CE workshops and facilities (e.g., power production, electrical, refrigeration, fabrication shops etc.). Direct preparation of stored assets for exercise or actual deployments. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).
**Principal Accountabilities**
+ Performs CSC Inspections on Containers as needed.
+ Coordinates, Oversees and Monitors periodic inspections and maintenance services on assigned assets in the Bear Base Departments.
+ Coordinates, Oversees and Monitors civil engineering and other equipment for exercises or actual deployments in the Bear Base Departments.
+ In the absence of the Power Production Supervisor operates, maintains, troubleshoots and repairs power generation equipment and related power generation duties.
+ Performs TDY within the area of operations as required.
+ In coordination with the Bear Base Superintendent schedules and coordinates with the Work Control all shop work assignments.
+ Responsibility as foreman of maintenance facilities and shops.
+ Instructs and trains supervisory personnel in maintenance repair techniques, inspects their work performance and documents training records. Conducts training on quality assurance, safety, Safety Data Sheets, security awareness and other subjects in accordance with appropriate plans.
+ Inspects Hazardous Materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.
+ Performs other duties as assigned by the Superintendent or Site Manager.
+ As alternate Bear Base Superintendent, performs all duties of that position during the temporary absence of the incumbent listed below
+ Receives, manages, accounts for stores; inspects and maintains equipment and assets.
+ Stocks and maintains parts, tools and supplies to perform required work on assets, requisitioning additional tools and parts as needed.
+ Responds to inquiries concerning storage and status of assigned equipment.
+ Plans, develops and implements procedures for all Bear Base technical work.
+ Coordinates the erection and construction of Bear Base assets to support real world exercises and contingencies.
+ Evaluates employees work performance, resolve personnel related problems and initiate action to correct substandard performance by personnel and determine logistic support.
+ Research assets/equipment discrepancies and identifies them to the customer.
+ Reviews Standard Basis Supply System (SBSS), supply documents to verify status of parts.
+ Reviews C49 to verify status of parts.
+ Submits the local purchase supply documents to procure item such as test and shop equipment, consumables, etc.
+ Reviews and inventories Organizational Equipment Listings (OEL) and Contract Data Requirement.
+ Lists (CDRL) for the department.
+ Performs other duties as assigned.
+ Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.
**Minimum Requirements**
+ Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs.
+ Ability to read, understand and interpret all technical data associated with Civil Engineering and BOB assets and related equipment required.
+ Must be able to obtain CSC Certification.
+ Must possess a valid home country driver's license and ability to obtain host nation driver's license.
+ Will be required to operate material handling equipment.
+ High School diploma or equivalent required.
+ Background in mechanical/electrical equipment maintenance required.
+ Requires experience in the operations and maintenance of electrical power production equipment and associated equipment.
+ Five years' experience with CE equipment and engineering workshop facilities required.
+ Five years' experience in an equipment management or CE equipment supervisory position and demonstrated understanding of Bear Base required.
+ May be exposed to extreme noise from operating equipment.
+ Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.
+ Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.
+ Must be able to travel domestically and internationally.
**Preferred Qualifications**
+ Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .